Filter
Top Products
13 Maintenance
Replacing Transfer Belt Unit
When the transfer belt unit is near or reaches the end of its life, the following messages are
displayed on the touch screen. Follow the messages.
Message Remaining Page Yield Solution
Consumables need to
be ordered. Press
Machine Status button
and select the Supplies
tab for details.
Approx. 30,000 pages Order the Transfer Belt
Kit.
Consumables need to
be replaced. Press
Machine Status button
and select the Supplies
tab for details.
- Replace the Transfer
Belt Kit with a new one.
Note • To prevent electric shock, always turn off the machine and disconnect the power cable from the
grounded outlet before performing maintenance.
• Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit.
Scratches, dirt, or oil from your hands on the film of the transfer belt unit may reduce print quality.
• To protect the drum cartridges from overexposure to bright light, close the inner cover within five
minutes. If the front cover remains open for more than five minutes, print quality may degrade.
1
Make sure that the <Data> indicator light is off and there are no jobs currently in process.
2
Press the power switch to the [ ] position to
switch the power off and wait for 30 minutes
before removing the transfer belt unit.
3
Raise the latch of the right hand cover and open
the cover.
230