Dell C5765dn Printer User Manual


 
15 Tools
Original Size Defaults
You can set the original sizes displayed in [Original Size] in the [Layout Adjustment] screen.
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, setting non-standard size as the
default will save your time to specify the size each time.
A/B Series Size
You can select a size from A and B series sizes such as A4 and B5.
Inch Size
You can select a size from Inch series sizes such as 8.5 x 11".
Others
You can select a size from other sizes such as photo and postcard.
Local Terminal Information
You can set the local terminal information, including a local name and company logo.
Note The displayed items may vary depending on the options installed.
You can set a company logo, G3 ID (fax number), G3 dial type, and G3 line type.
Local Name
Register the name of the local terminal as the local name.
The local name is shown in the recipient's touch screen or Activity Report. Depending on the
recipient's device, however, it may not be displayed.
Specify a local name with up to 20 single-byte characters using the keyboard displayed or the
numeric keypad.
Company Logo
Register the sender name (company logo). The company logo is printed in the Transmission
Header Text or Cover Page. Specify a company log with up to 60 single-byte characters using
the keyboard displayed or the numeric keypad.
Note If [Line 1 - Company Logo] is not registered, the company logo is used.
Machine Password
Set the machine password when you want to limit the other parties that can send faxes.
When the machine password is set, only a party that sends the correct machine password by
F code is allowed to send or poll. Note that this means that faxes cannot be accepted from a
fax without the F Code feature.
Line 1 - Company Logo
Register the sender name for line 1. The sender name is printed in the Transmission Header
Text or Cover Page. Enter up to 60 single-byte characters using the keyboard displayed or the
numeric keypad.
G3 Line 1 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
Note A G3 ID (fax number) can consist of not more than 20 digits, including 0 to 9, +, and space.
366