Filter
Top Products
Status Code
Status Code Cause and Remedy
133-210
[Cause] An error occurred during fax transmission.
133-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-212
on the machine power. If the error still is not resolved, contact Customer Support at
133-213
dell.com/contactdell.
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
133-226
[Cause] A country/region code not supported by the machine was specified.
[Remedy] Contact Customer Support at dell.com/contactdell.
133-280
[Cause] An error occurred during fax transmission.
133-281
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-282
on the machine power. If the error still is not resolved, contact Customer Support at
133-283
dell.com/contactdell.
133-710
[Cause] When printing the received fax document, the paper loaded on the bypass tray was used
for printing because the specified tray could not be used.
[Remedy] Take one of the following measures:
• Load paper available for printing the received fax document:
B5 LEF , A4 SEF , A5 SEF , B5 SEF ,
8.5 x 11" SEF , 8.5 x 13" SEF , 8.5 x 14" SEF ,
8.5 x 11" LEF , 5.5 x 8.5" SEF .
• Use a paper type available for printing the received fax document:
plain paper, bond paper, recycled paper, side 2 paper, user-defined custom paper.
• Confirm the settings by selecting [Tools] > [System Settings] > [Fax Service
Settings] > [Fax Control] > [Receiving Paper Size].
1)Select [Receiving Paper Size] > [Tray Mode] to add a tray to be used for printing the
received fax documents.
2)Set up paper so that the tray specified for [Tray Mode] can be used for printing the
received fax documents.
If the error still is not resolved, contact Customer Support at dell.com/contactdell.
Note • If you cannot resolve an error despite following the instructions described in the table, contact
Customer Support at dell.com/contactdell.
615