Filter
Top Products
15 Tools
Fax Defaults
You can set the default settings of the Fax services. When the machine is turned on, or the
machine exits from the Power Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values specified under this menu. By setting frequently used
features and values as the defaults, you can simplify operations.
Resolution
Set the default value for [Resolution] in the [Fax] screen.
Original Type
Set the default value for [Original Type] in the [Fax] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] in the [Fax] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Starting Rate
Set the default value for [Starting Rate] in the [Fax Options] screen.
Delay Start - Specific Time
Set the default value for [Specific Time] of [Priority Send/Delay Start] in the [Fax Options]
screen when [Specific Time] is selected for [Delay Start].
Transmission Header Text
Set the default value for [Transmission Header Text] in the [Fax Options] screen.
Confirmation Options
Set the default value for [Confirmation Options] in the [Fax Options] screen.
Fax Control
You can configure the settings related to fax control.
Re-enter Recipients
Set whether to re-enter the recipient after once specifying the recipient, to reduce the risk of
sending a fax to the wrong address. When Re-enter Recipients is set to [Enter Twice], if you
specify the recipient by entering the phone number, or by selecting from the Address Book,
the screen prompting you to re-enter the recipient appears. If the same recipient has been
entered, the transmission process will start.
Re-enter Broadcast Recipients
This setting is required when you selected [Enter Twice] for [Re-enter Recipients]. Set
whether or not to allow the Broadcast Send.
• Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
• Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
360