Filter
Top Products
2 Product Overview
Power Source
The machine is provided with the power switch and the main power switch.
Power switch
To use the machine, press the power switch to
the [ | ] position to switch its power on. You can
start operations after the machine warms up.
Main power switch
Press the main power switch to the [
position. The <Main Power> indicator goes
out on the right side of the control panel, and
the machine powers off. Do not switch the main
power off except when you connect a cable to the machine or clean the machine. Switching
off the main power may erase the data in the memory when using the Fax service.
Switching the Main Power On
]
Power Switch
Main Power
Switch
The following describes how to switch the main power on.
Note • Do not switch off the main power immediately after switching on the main power. This may damage
the hard disk and the memory or cause a machine malfunction.
1
Make sure that the power cord is plugged in correctly.
2
Press the main power switch to the [ | ]
position to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
Switching the Power On
The following describes how to switch the power on.
The machine takes approximately 35 seconds to warm up and to be ready to copy or print
after switching the power on. This may take more time depending on the configuration of
your machine.
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
You can also use the Power Saver feature to save power consumption while the machine is
not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.38).
Note • If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
34