Filter
Top Products
Management
SOAP
SOAP
The service controller provides a SOAP interface that can be used by SOAP-compliant client
applications to perform configuration and management tasks.
The SOAP/XML SDK is available on the HP ProCurve Networking manuals page at:
www.procurve.com/manuals under MSM7xx Controllers.
Configuring the SOAP server
Select Management > SOAP to open the SOAP server configuration page. By default, the
SOAP server is enabled (SOAP server configuration in title bar is checked).
Server settings
Secure HTTP (SSL/TLS)
Enable this option to configure the SOAP server for SSL/TLS mode. When enabled, the
Secure Sockets Layer (SSL) protocol must be used to access the SOAP interface.
Using client certificate
When enabled, the use of a X.509 client certificate is mandatory for SOAP clients.
HTTP authentication
When enabled, access to the SOAP interface is available via HTTP with the specified
username and password.
4-13