Filter
Top Products
Working with controlled APs
Defining VLANs
APs requiring synchronization are displayed with an orange background and show
Unsynchronized in the Diagnostic column.
2. Select a Synch link in the Action column to synchronize a single AP.
Or, to synchronize all unsynchronized APs in the group, select Synchronize
Configuration in the Select the action to apply to all listed APs list, and select
Apply.
3. Monitor synchronization progress by watching the Diagnostic column. Messages such as
Resetting configuration and Restoring configuration will appear during the
synchronization process.
4. As each synchronization completes, the Status light icon and background color of the
synchronized AP changes to green. The status light icon next to the AP name under the
pertinent group name in the Network tree also changes to green. This indicates that the
AP is fully operational and using its new configuration.
Defining VLANs
This section describes how to assign an egress VLAN to controlled APs. All traffic from
wireless users will be forwarded to the service controller on the specified VLAN.
To define VLANs on an MSM317 switch port, see the MSM317 Installation and Getting
Started Guide.
For information on the service controller VLAN implementation, see VLAN support on
page 10-11.
3-28