Filter
Top Products
NOC authentication
Activating a remote login page with NOC authentication
Activating a remote login page with NOC
authentication
To activate a remote login page, you must define several service controller attributes. These
attributes can be defined in the RADIUS account for the service controller (if you are using a
RADIUS server) or they can be locally configured.
The following table summarizes the Colubris-AVPair value strings for the remote login page
with NOC authentication.
Item Colubris-AVPair value string
External login
login-url=URL_of_the_page [placeholder]
URL of the remote login page. Access to the Web server hosting this page
must be granted to all unauthenticated users. Do this with an appropriate
access list definition.
NOC certificate
ssl-noc-certificate=URL_of_the_Certificate
Certificate issued to the application on the Web server that sends user
info to the service controller for authentication.
NOC CA
certificate
ssl-noc-ca-certificate=URL_of_the_certificate
Certificate of the certificate authority (CA) that issued the NOC
certificate.
Custom SSL
certificate
ssl-certificate=URL_of_the_certificate
Custom certificate installed on the service controller.
The following placeholders can be added to the login-url string.
Placeholder Description
%c
Returns the IP address of the user’s computer.
%d
Returns the WISPr location-ID. Supported for login-url only.
%e
Returns the WISPr location-Name. Supported for login-url only.
%l
Returns the URL on the service controller where user login information
should be posted for authentication. By default, this value is URL
encoded. (To enable/disable URL encoding, set the value of url-encode in
the <ACCESS-CONTROLLER> section in the configuration file.)
%n
Returns the NAS ID assigned to the service controller. By default, this is
the unit’s serial number. Not supported in local mode.
%s
Returns the RADIUS login name assigned to the service controller. By
default, this is the unit’s serial number. Not supported in local mode.
D-4