Filter
Top Products
Working with public access attributes
Attribute definitions
MSCHAP-Response
(string)
As defined in RFC 2433. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv1. Length = 49 bytes.
MSCHAPv2-Response
(string)
As defined in RFC 2759. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv2. Length = 49 bytes.
Vendor-specific (WISPr)
HP ProCurve supports the following Wi-Fi Alliance vendor-specific attributes.
Location-Name
The WISPr location name assigned to the service controller.
SMI network management private enterprise code = 14122
Vendor-specific attribute type number = 2
Attribute type: A string in the format: wispr-location-name=location_name
Location-ID
The WISPr location name assigned to the service controller.
SMI network management private enterprise code = 14122
Vendor-specific attribute type number = 1
Attribute type: A string in the format: wispr-location-id=location_id
Logoff-url
The WISPr log-off URL that will be used.
SMI network management private enterprise code = 14122
Vendor-specific attribute type number = 3
Attribute type: A string in the format: wispr-logoff-url=URL
Access accept
Class
(string)
As defined in RFC 2865. Multiple instances are supported.
EAP-Message
(string)
Only supported when authentication is EAP-MD5. Note that the content will not be read as
the RADIUS Access Accept overrides whatever indication is contained inside this packet.
Session-Timeout
(32-bit unsigned integer)
The service controller will retrieve RADIUS attributes when this timer expires. Omitting this
attribute or specifying 0 disables the feature. (Note that this is configurable directly on the
service controller by setting Public access > Attributes > Retrieval interval.
9-14