Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - User values
Where:
Parameter Description
address
Specify the IP address or domain name of the e-mail server which is used to
send outgoing redirected mail.
port
Specify the port on the e-mail server to relay to. Range: 1 to 65535. Default:
25
username
Specify the username required to log on to the SMTP server. Maximum 32
characters.
Only supported if the Support authentication on SMTP proxy server
option is enabled on the Public access > Access control page. Works
with SMTP servers that support PLAIN, CRAM-MD5, and no authentication.
password
Specify the password required to log on to the SMTP server. Maximum 32
characters.
Only supported if the Support authentication on SMTP proxy server
option is enabled on the Public access > Access control page. Works
with SMTP servers that support PLAIN, CRAM-MD5, and no authentication.
Example 1: Proxy support on
smtp-redirect=smtp.mycompany.com,jimmy,letMEin
smtp-redirect=smtp.mycompany.com:8025,jimmy,letMEin
Example 2: Proxy support off
smtp-redirect=smtp.mycompany.com
smtp-redirect=smtp.mycompany.com:8025
Station polling
The service controller continually polls authenticated client stations to ensure they are
active. This feature is configured using the Client polling settings on the Public access >
Access control page. If no response is received and the number of retries is reached, the
client station is disconnected.
These keywords let you override the Client polling settings on a per-user basis.
Syntax
polling-arp-interval=interval
polling-max-arp-count=count
Where:
Parameter Description
interval
Specify how (in seconds) long to wait between polls.
9-68