Filter
Top Products
Working with VPNs
Securing wireless client sessions with VPNs
Option Value to set Notes
Security policy Subnet and Mask of
0.0.0.0
A Subnet and Mask of 0.0.0.0. causes all
wireless traffic between the client and the
service controller to be accepted.
See the online help for option descriptions.
Configure L2TP server for wireless client VPN
1. On page Service Controller >> VPN > L2TP server enable L2TP over IPSec
configuration- LAN port.
2. Either select X.509 certificates and install an X.509 security certificate (see IPSec
certificates on page 5-12), or specify a Preshared key.
Note The VPN client running on the wireless device must also be configured with a matching
X.509 certificate, or the Preshared key specified here.
3. Set Address source to VPN address pool.
See the online help for option descriptions.
Configure PPTP server for wireless client VPN
1. On page Service Controller >> VPN > PPTP server enable PPTP server
configuration - LAN port.
2. Set Address source to VPN address pool. See the online help for option descriptions.
12-5