Filter
Top Products
Network configuration
Port configuration
Port configuration
The Port configuration page displays summary information about all ports, VLANs, and
GRE tunnels. Open this page by selecting Service Controller >> Network > Ports.
Port configuration information
Status indicator: Operational state of each port, as follows:
Green: Port is properly configured and ready to send and receive data.
Red: Port is not properly configured or is disabled.
Name: Identifier for the port. To configure a port, click its name.
IP address: IP addresses assigned to the port. An address of 0.0.0.0 means that no
address is assigned.
Mask: Subnet mask for the IP address.
MAC address: MAC address of the port.
Default port settings
By default, ports are configured as follows:
Port Default IP address Default DHCP server status
LAN 192.168.1.1 Disabled.
Internet DHCP client This feature is not available on the Internet port.
10-3