Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - Site values
Activating site access lists
When an access list is activated on the service controller, it applies to all access controlled
user traffic handled by the service controller.
Access lists are activated by adding the following Colubris AV-Pair value string to the
RADIUS profile for a service controller or to the local list (Public access > Attributes
page).
use-access-list=uselistname
Only one access list can be active on the service controller. This list must be initialized
without an error.
It is possible to set an access list to apply only for unauthenticated users by specifying the
following value string:
use-access-list-unauth=uselistname
User access lists
Access lists can also be activated on a per-user basis by configuring the appropriate settings
for each user account. See Access list on page 9-64 for more information.
A default access list can defined by adding the following Colubris AV-Pair value string to the
RADIUS profile for a service controller or to the local list (Public access > Attributes
page). This defines the access list to use for all users whose profiles do not contain an access
list value.
default-user-access-list=uselistname
9-34