Filter
Top Products
Working with public access attributes
Attribute definitions
Access request
Acct-Session-Id
(32-bit unsigned integer)
Random value generated per authentication by the service controller.
Called-Station-Id
(string)
By default, this is set to the MAC address of the service controller wireless/LAN port in IEEE
format. For example: 00-02-03-5E-32-1A. To use the MAC address of the Internet port, you
must edit the config file and change the setting of radius-called-station-id-port to WAN in
the <ACCESS-CONTROLLER> section. If location-aware authentication is enabled for the
VSC the user is logged into, then this value is defined by the VSC.
Calling-Station-Id
(string)
The MAC address of the user’s station in IEEE format. For example: 00-02-03-5E-32-1A.
CHAP-Challenge
(string)
Randomly generated. As defined in RFC 2865. Only present when the authentication method
for the RADIUS profile is set to CHAP. Length = 19 bytes.
CHAP-Password
(string)
The user’s password. Encoded as defined in RFC 2865. Only present when the authentication
method for the RADIUS profile is set to CHAP.
Chargeable User Identity (CUI)
(string)
As defined in RFC-4372. The CUI is used to associate a unique identifier with a user so that
the user can be identified (for billing, authentication or other purposes) when roaming
outside of their home network.
Connect-Info
(string)
The string “HTTPS” or “IEEE802.1X”.
EAP-Message
(string)
As defined in RFC 2869. Only present when the authentication method for the RADIUS profile
is set to EAP-MD5.
Framed-IP-Address
(32-bit unsigned integer)
IP Address as configured on the client station (if known by the service controller).
Framed-MTU
(32-bit unsigned integer)
Hard-coded value of 1496. The value is always four bytes lower than the wireless MTU
maximum which is 1500 bytes in order to support IEEE802dot1x authentication.
9-18