Working with controlled APs
Configuring APs
Working with APs
Manually adding a new AP
You can manually add APs to the service controller before connecting the APs to the
network. This is useful, for example, when you want to pre-designate the group into which an
AP will be placed.
1. Select Controlled APs >> Overview > Configured APs.
2. Select Add.
3. In the Device box, identify the new AP, specifying at a minimum, Device Name,
Ethernet BASE MAC (printed on the label affixed to each AP), and Group.
Select Save. The AP is added to the selected group in the Network tree and will also be
shown in the Configured APs list.
3-25