Filter
Top Products
Working with VPNs
Securing wireless client sessions with VPNs
Configure an IPSec profile for wireless client VPN
1. On page Service Controller > VPN > IPSec select Add Policy, and define a policy
similar to this:
Note the selections made in the sample Add/Edit security policy page above.
Option Value to set Notes
General Enabled
Name user-defined
Phase 1 mode Aggressive mode Aggressive mode requires that a group be
configured. See Local group list on
page 12-12.
Mode Tunnel with Virtual
IP
Allows IP addresses to be assigned to the
wireless clients.
Interface LAN port
Encryption
algorithm
Select as desired
Perfect Forward
Secrecy
Leave enabled
Accept any peer Enabled Accepts any wireless client.
XAUTH >
Authentication
Enabled
Allocate address
from
VPN address pool First define address pool on Network >
Address allocation.
12-4