Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - Site values
Placeholder Description
%G
When the location-aware feature is enabled, returns the group name of the
wireless access point the user is associated with.
%C
When the location-aware feature is enabled, returns the Called-station-id
content for the wireless access point the user is associated with.
%r
Returns the string sent by the RADIUS server when an authentication
request fails. The RADIUS server must be configured to support this
feature. The information contained in the returned string depends on the
configuration of the RADIUS server.
%m
Returns the MAC address of the wireless/wired client station that is being
authenticated.
%v
Returns the VLAN assigned to the client station at the service controller
ingress (LAN port).
Note The maximum length of the remote login page URL is 512 characters. If this is exceeded
(when using placeholders for example), the URL is truncated. It is therefore recommended
that you specify the most-important placeholders first.
Example
One way to use this feature is to offer a premium service for a given (or all) sites. For
example, in the service controller profile, define two lists, one for normal usage and one for
premium usage:
access-list=normal,REDIRECT,tcp,www.mypremiumservice.com,80
access-list=normal,ACCEPT,all,all,all
access-list=premium,ACCEPT,all,all,all
redirect-url=http://www.mysite.com/getpremium/
In the RADIUS profile for normal users, map them to the “normal” access list:
use-access-list=normal
In the RADIUS profile for premium users, map them to the “premium” access list:
use-access-list=premium
The access list only takes effect on an authentication, so a change of service as shown in this
example takes effect only at the user’s next authentication (login).
9-58