Filter
Top Products
Working with public access attributes
Defining and retrieving site attributes
Defining and retrieving site attributes
RADIUS attributes can be used to define a number of features for the public access interface.
Attributes can be retrieved from a third-party RADIUS server or defined directly on the
service controller.
For a complete list of all supported site attributes, see Site attributes on page 9-11.
Select Public Access > Attributes to open the RADIUS Attributes page.
Configurable parameters on the RADIUS Attributes page include those described in the
following sections.
Retrieve attributes using RADIUS
If you enable this option, the service controller will use the services of a third-party RADIUS
server to retrieve configuration settings for customization of the public access interface. The
settings must be defined in a RADIUS account for the service controller.
The retrieved attributes are combined with those defined in the Configured attributes list
(if any) to build the complete list of defined attributes. If the same attribute is defined on both
the RADIUS server and in the Configured attributes list, the setting of Retrieved
attributes override configured attributes determines which setting is used.
Note The total number of attributes that can be defined via RADIUS and the Configured
attributes list is 128 attributes.
9-3