Filter
Top Products
Working with controlled APs
Discovery of controlled APs
Monitoring the discovery process
This Summary menu lists the number of controlled APs discovered by the service controller.
APs are grouped according to their management state. For example: Synchronized,
Detected, Configured, Pending.
An AP may be active in more than one state at the same time. For example, an AP may be
both Detected and Synchronized. Select the state name to display information about all
APs in that state.
Viewing all discovered APs
To display information about APs discovered by the service controller, select Controlled
APs >> Overview > Discovered APs.
The Discovered APs page provides the following information:
Number of access points: Indicates the number of APs that were discovered.
Select the action to apply to all listed APs: Lets you apply the selected action to all
APs in the list. Select an action and then Apply.
Status:
Green: The AP is synchronized, meaning that the AP is connected, running, and has
received its configuration from the service controller.
Yellow: The AP is unsynchronized, meaning that the AP is operational but does not
have the same configuration as the service controller, yet.
Red: The AP is not part of the controlled network and is not providing wireless
services. See the Diagnostic column for details.
Grey blinking: An action is pending.
Grey: The AP is configured in a group, but has not been discovered on the network.
AP name: Name assigned to the AP.
3-13