Filter
Top Products
Wireless mobility
Wireless mobility scenario
G. Configure the radios
Configure the radios of both APs as indicated here.
1. Select Service Controller > Controlled APs >> Configuration > Radio list, select a
product and configure the following highlighted items (sample shown for MSM310):
2. Set Operating mode to Access point only.
3. Set Wireless mode according to phone type. It is recommended that you select 802.11b/
g even if your phones only support 802.11b.
H. Add a user
1. On page Service Controller >> Users > User Accounts, add a test user as highlighted:
2. Under General, fill in User name, and Password.
3. Clear Access-controlled account.
I. Test with a Wi-Fi phone
You can follow these basic steps to test your Mobility network with a Wi-Fi phone.
If you enabled WPA2 Opportunistic Key Caching in step F.6 above, test with a Wi-Fi
phone that supports this such as the Hitachi WIP-5000-EA.
11-9