Filter
Top Products
Working with VSCs
VSC configuration options
Note Traffic from specific users can be Intercepted. To enable traffic interception for a specific
user, you must specify the appropriate setting in the user’s RADIUS account. See Colubris-
Intercept on page 9-22.
Default user data rates
These options enable you to set the default data rates for authenticated users that do not
have a data rate set in their RADIUS accounts and unauthenticated users. For details on
setting the appropriate RADIUS attributes to accomplish this, see Chapter 8: Public/guest
network access and Chapter 9: Working with public access attributes.
The throughput limits globally defined on the Service Controller >> Network >
Bandwidth control page always take precedence over user data rates. This means if you set
a data rate which exceeds the configured bandwidth level, the rate will be capped at the
bandwidth level.
Wireless mobility
Mobility services are only available when Access control is disabled (under General) and
the Mobility license is installed. See Mobility license on page 11-2.
WPA2 opportunistic key caching eliminates the delays associated with reauthentication
when users roam between APs on the same layer 2 network. This also requires that WPA2
be used.
Layer 3 mobility enables users to move between APs that are connected to different IP
subnets while maintaining their assigned IP address. Typical applications are VoWLAN
and the roaming and maintaining of VoWLAN calls when moving between subnets.
See Chapter 11: Wireless mobility.
2-12