Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - User values
Advertising
Add this keyword to enable the presentation of advertising at preconfigured intervals while
the user is browsing.
Syntax
ads-presentation=value
Where:
Parameter Description
value
Set this to 1 to activate the display of advertising. Set to 0 to disable.
Bandwidth level
This keyword sets bandwidth level for a user’s session. The actual data rate associated with a
bandwidth level is defined on the Network > Bandwidth control page.
Syntax
bandwidth-level=level
Where:
Parameter Description
level
Specify one of the following the bandwidth levels for the user’s session:
VERY-HIGH
HIGH
NORMAL
LOW
Data rate
This keyword sets the transmit and receive rates for a user’s session. These rates are applied
on a per-user basis providing direct control of a user’s throughput in Kbps. Two keywords are
available:
max-input-rate: Controls the data rate at which traffic can be transferred from the user to
the service controller.
max-output-rate: Controls the data rate at which traffic can be transferred from the
service controller to the user.
Note The settings for bandwidth level always take precedence over user data rates. This means if
you set a data rate which exceeds the configured bandwidth level, the rate is capped at the
bandwidth level.
9-65