Filter
Top Products
Security
Firewall
Incoming traffic
Firewall setting
Application Low High
FTP (passive mode) Passed Blocked
FTP (active mode) Passed Blocked
Web (HTTPS) Passed Blocked
Web (HTTP) Passed Blocked
Telnet Passed Blocked
Windows networking Passed Blocked
PPTP from remote client to a server on the local network Passed Blocked
ping client on local network Passed Blocked
IPSec pass-through Passed Blocked
NetBIOS Passed Blocked
NetMeeting (receive call) Passed Blocked
Firewall configuration
To configure a firewall, select Service Controller >> Security > Firewall. The Firewall
configuration page opens.
Select Preset firewall to use a preconfigured firewall setting of High or Low. Select
View to see the firewall rules for the selected setting.
Select Custom firewall if you have specific security requirements. This setting enables
you to target specific protocols or ports.
5-4