Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - Site values
Note Placeholders %G, %C, %E, %P, and %v do not produce constant values. These values may vary
over time.
Use the following Colubris AV-Pair value string:
redirect-url=URL_of_the_page [placeholder]
Where:
Parameter Description
URL_of_the_page URL of the redirect page. Access to the Web server hosting this
page must be granted to all unauthenticated users. Do this with an
appropriate access list definition.
The following placeholders can be added to the redirect-url string.
Placeholder Description
%c
Returns the IP address of the user’s computer.
%l
Returns the URL on the service controller where user login information
should be posted for authentication. By default, this value is URL
encoded. (To enable/disable URL encoding, set the value of url-encode in
the <ACCESS-CONTROLLER> section in the configuration file.)
%n
Returns the NAS ID assigned to the service controller. By default, this is
the unit serial number. Not supported in local mode.
%s
Returns the RADIUS login name assigned to the service controller. By
default, this is the unit serial number. Not supported in local mode.
%o
Returns the original URL requested by the user. By default, this value is
URL encoded. (To enable/disable URL encoding, set the value of url-
encode in the <ACCESS-CONTROLLER> section in the configuration
file.)
%i
Returns the domain name assigned to the service controller Internet port.
%p
Returns the port number on the service controller where user login
information should be posted to for authentication.
%a
Returns the IP address of the service controller interface that is sending
the authentication request.
%E
When the location-aware feature is enabled, returns the ESSID of the
wireless access point the user is associated with.
%P
When the location-aware feature is enabled, returns the wireless mode
(“ieee802.11a”, “ieee802.11b”, “ieee802.11g”) the user is using to
communicate with the access point.
9-57