Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - Site values
Syntax
default-user-one-to-one-nat=value
Where:
Parameter Description
value
Set this to 1 to activate one-to-one NAT support.
Default user session timeout
Use this to set the default session timeout for all users whose RADIUS profile does not
contain a value for the RADIUS attribute session-timeout.
Syntax
default-user-session-timeout=seconds
Where:
Parameter Description
seconds
Specify the maximum amount of time a user session can be connected.
Once this time expires, the session is automatically terminated. A value of
0 means no timeout.
Default user public IP address
Use this to set the default value for public IP address assignment for users whose RADIUS
profile does not contain a value for use-public-ip-subnet (Public IP address on page 9-66).
Syntax
default-user-use-public-ip-subnet=value
Where:
Parameter Description
value
Set this to 1 to activate assignment of a public IP address. Set to 0 to
disable.
Default user SMTP server
Use this to set the default SMTP server address for all user sessions. This address is used if a
specific server is not set for a particular user.
Syntax
default-user-smtp-redirect=hostname[:port][,username,password]
9-51