Filter
Top Products
Working with controlled APs
Provisioning
Discover using IP address
The AP attempts to connect with a service controller using the IP addresses in the order that
they appear in this list.
Provisioning summary
The following table defines the potential outcome for all provisioning scenarios.
Connectivity
provisioned
Discovery
provisioned Result
No No Default behavior is used for connectivity and discovery.
See Discovery of controlled APs on page 3-7.
No Yes Discovery occurs using the provisioned methods on the
following interfaces:
Last interface on which a service controller was
discovered. (Only applies to APs that have
previously discovered a service controller.)
Untagged on port 1 (Uplink port on the MSM317).
All detected VLANs (in sequence) on port 1 (Uplink
port on the MSM317).
Yes No Discovery methods are used according to the
provisioned connectivity settings. See Discovery of
controlled APs on page 3-7.
Note: DHCP discovery is not executed if a static IP
address is provisioned.
Yes Yes Discovery occurs using the provisioned methods over
the provisioned connectivity. The provisioned
discovery method is retried indefinitely if it fails,
however other discovery methods are not attempted.
3-37