Filter
Top Products
Working with controlled APs
Discovery of controlled APs
Viewing all configured APs
To display information about APs configured by the service controller, select Controlled
APs >> Overview > Configured APs.
The Configured APs page provides the following information:
Number of displayed access points: Number of configured APs that were discovered.
Detected: Status light icon indicating if the AP has been detected.
Green: The AP has been discovery and is listed on the AP overview page, where more
information is provided on the AP.
Red: The AP has not been discovered.
AP name: Name assigned to the AP. Select the name to open its AP management page.
Serial number: Serial number assigned to the AP. Select the serial number to open its
AP management page.
Group Name: Group that the AP is part of.
Product: Product name of the MSM AP.
Creation mode:
Local: AP was added manually, or was manually authenticated after being
discovered.
RADIUS: AP was successfully authenticated via RADIUS and then created.
External file: AP was successfully authenticated using the external file option.
Discovered: Automatically detected by the service controller based on discovery-
time parameter exchange.
Already Seen: The AP established a management tunnel to the service controller at least
once in the past.
3-17