Filter
Top Products
Working with public access attributes
Attribute definitions
NAS-Identifier
(string)
The NAS ID set on the Service Controller >> Authentication > RADIUS profiles > Add
New Profile page for the RADIUS profile being used.
NAS-Ip-Address
(32-bit unsigned integer)
The IP address of the port the service controller is using to communicate with the RADIUS
server.
NAS-Port
(32-bit unsigned integer)
A port number, other than 0.
NAS-Port-Type
(32-bit unsigned integer)
Always set to 19, which represents WIRELESS_802_11.
Message-Authenticator
(string)
As defined in RFC 2869. Always present even when not doing an EAP authentication. length =
16 bytes.
Service-Type
(32-bit unsigned integer)
RADIUS service type.
State
(string)
As defined in RFC 2865.
User-Name
(string)
The username assigned to the user or a device when using MAC authentication.
User-Password
(string)
The password supplied by a user or device when logging in. Encoded as defined in RFC 2865.
Only present when the authentication method for the RADIUS profile is set to PAP.
Vendor-specific (Microsoft)
HP ProCurve supports the following Microsoft vendor-specific attributes.
MSCHAP-Challenge
(string)
As defined in RFC 2433. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv1 or MSCHAPv2. Length = 8 bytes.
MSCHAP-Response
(string)
As defined in RFC 2433. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv1. Length = 49 bytes.
9-19