Filter
Top Products
Working with public access attributes
Attribute definitions
Access request
Framed-MTU
(32-bit unsigned integer)
Hard-coded value of 1496. The value is always four bytes lower than the wireless MTU
maximum which is 1500 bytes in order to support IEEE802dot1x authentication.
NAS-Identifier
(string)
The NAS ID set on the Service Controller >> Authentication > RADIUS profiles > Add
New Profile page for the RADIUS profile being used.
User-Name
(string)
The username assigned to the administrator.
Service-Type
(32-bit unsigned integer)
As defined in RFC 2865. Set to a value of 6, which indicates
SERVICE_TYPE_ADMINISTRATIVE.
Vendor-specific (Microsoft)
HP ProCurve supports the following Microsoft vendor-specific attributes.
MSCHAP-Challenge
(string)
As defined in RFC 2433. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv1 or MSCHAPv2. Length = 8 bytes.
MSCHAP-Response
(string)
As defined in RFC 2433. Only present when the authentication method for the RADIUS
profile is set to MSCHAPv1. Length = 49 bytes.
Access accept
Vendor-specific (Colubris)
(string)
Colubris AV-Pair
HP ProCurve has defined a vendor-specific attribute to support configuration of user
session settings. This attribute conforms to RADIUS RFC 2865. You may need to define
this attribute on your RADIUS server (if it is not already present) using the following
values:
SMI network management private enterprise code = 8744
Vendor-specific attribute type number = 0
Attribute type: A string in the following format <keyword>=<value>
9-28