Filter
Top Products
Working with public access attributes
Colubris AV-Pair attribute - User values
Syntax
max-output-rate=rate
max-input-rate=rate
Where:
Parameter Description
rate
Maximum transmit or receive speed in Kbps.
One-to-one NAT
Note This feature only applies to client traffic using IPSec or PPTP on the Internet port.
Add this keyword if the user requires a unique IP address when NAT is enabled on the service
controller.
Syntax
one-to-one-nat=value
Where:
Parameter Description
value
Set this to 1 to activate one-to-one NAT support.
Public IP address
Add this keyword if the user requires a public IP address that is visible on the external
network connected to the service controller Internet port.
Syntax
use-public-ip-subnet=value
Where:
Parameter Description
value
Set this to 1 to activate assignment of a public IP address. Set to 0 to
disable.
Quotas
These keywords let you define upload and download limits for each user. Limits can be
defined in terms of packets or octets (bytes).
9-66