8260A>
8260A> show counter repeater ethernet_1 module 2
Repeater Statistics for Module 2 on ETHERNET_1
-----------------------------------------------------------------------------
Readable Frames 0
Readable Octets 0
Runts 0
FCS Errors 0
Late Events 0
Short Events 0
Frame Too Longs 0
Very Long Events 0
Alignment Errors 0
Collisions 0
Data Rate Mismatches 0
Auto Partition Count 0
8260A>
Figure 120. Show Counter Repeater for Ethernet Segment
Note: With the current release of the DMM code, we could not display this
information about the 8250 Ethernet modules, regardless of where the E-MAC
was installed.
4. Display RMON host statistics
You can display the RMON Host group for stations attached to a segment
using the following command:
SHOW COUNTER RMON HOSTS {network} {all | mac_address}
An example of the output displayed for this command is shown in Figure 121
on page 218.
Chapter 10. 8260 RMON Support 217