Filter
Top Products
•
Dot5 Group
•
Frame Relay Group
•
IP Forward Group
•
OSPF Group
•
PPPF Group
•
Retix Private MIB extensions
The following SNMP traps will be sent by the SNMP agent to the SNMP
managers which have been defined as a
trap receiver
.
•
coldStart
•
linkUp
•
Enterprise specific traps:
− frDCLiStatusChange
− newRoot
•
Retix Enterprise specific traps:
− logicalPortUp
− logicalPortDown
− fpUp
− fpDown
− hardwareFail
− temperatureOverheat
− powerSupplyFail
11.8 Configuring the Interconnect Module Using LMS
To configure the Multiprotocol Interconnect module, you must have a
write
session and must select
configuration
from the initial LMS menu. The panel
shown in Figure 141 on page 252 will be displayed.
Using this panel you can configure the following features:
•
System wide parameters
•
Port parameters
•
Bridging parameters
•
Routing parameters
Chapter 11. 8260 Multiprotocol Interconnect Module 251