IBM 8260 Switch User Manual


 
8260A> show rmon host data 1 all by_creation_order
RMON Host display for Interface 3 :
Creation Order : 1
Host Address : 10-00-5A-D4-B0-8C
Input Packets : 2954
Output Packets : 2954
Input Octets : 301308
Output Octets : 301308
Output Errors : 0
Output Packets (Broadcast) : 0
Output Packets (Multicast) : 0
Creation Order : 2
Host Address : 10-00-5A-82-5A-6A
Input Packets : 2963
Output Packets : 2963
Input Octets : 301960
Output Octets : 301960
Output Errors : 0
Output Packets (Broadcast) : 0
Output Packets (Multicast) : 0
-- More --
................
End of Host Table
Figure 123. RMON Host Statistics Display
10.6.5 SHOW COUNTER Command for Token-Ring Networks
This command allows you to display the following information about the
segments to which the DMM has an interface via a T-MAC:
1. Display error statistics for a token-ring segment
You can display the error statistics (DOT5) for token-ring segments using the
following command:
SHOW COUNTER TOKEN_RING {token_ring_n}
Note: These counters are not related to RMON.
An example of the output displayed for this command is shown in Figure 124
on page 223.
222 8260 Multiprotocol Intelligent Switching Hub