Filter
Top Products
Config * OSPF Static Filter Table Module: BladeRunner
System Page 1 Time: 17:47 11 Jan 95
IP Address IP Mask TOS Action
Add Entry Prev Page Next Page Exit
Return to the previous screen
Figure 180. LMS OSPF Static Filter Table Panel
This panel allows you to define the following parameters for each filter entry:
•
IP Address
This parameter specifies the destination IP address.
•
IP Mask
This parameter specifies the mask associated with the IP address.
•
TOS
This parameter specifies the Type Of Service for this route.
•
Action
This parameter specifies whether to import a route in case of a match.
13. You may define a conversion table that contains information for converting
static route′s hop count to an OSPF′s metric for each configured pair of
destination IP address and its mask. To do so, select
OSPF Static Convert
Table
from the
OSPF Menu
. An example of the resulting panel is shown in
Figure 181 on page 303.
302 8260 Multiprotocol Intelligent Switching Hub