Filter
Top Products
* Help Screen Module: BladeRunner
Time: 13:07 5 Jan 95
control-C: Cancel input, cancel a popup menu, or exit a screen
control-J: Go to the screen jump table
control-K: Go to this help screen
control-L: Refresh the screen display
control-P,
control-T: Go to the top of the menu hierarchy
control-W: Toggle write access for this session
control-X: Jump to the equivalent screen in the other mode
Exit
Return to the previous screen
Figure 139. LMS Short Cut Commands
Most of the commands displayed in Figure 139 are self-explanatory but the
following paragraphs deal with a couple of the commands which may require
explanation.
Jump table provides you with a shortcut facility to view the screen you desire
without having to traverse through the menu tree. To use the Jump table,
you need to know the name of the screen you want to view. Figure 140 on
page 250 shows the contents of the Jump table.
To use the Jump table, move the cursor to highlight the name of the screen
you want to view then press Enter. The selected screen is then displayed.
When using CTRL-W to toggle from read-only to write access, you will be
prompted to enter the write password. Also, if someone else is running a
write session with this module, this command will not be available.
Chapter 11. 8260 Multiprotocol Interconnect Module 249