Filter
Top Products
3. Enable the collection of RMON information by T-MAC, using the following
command:
SET MODULE {slot.subslot} RMON_GROUP enable
This command enables the collection of RMON information by T-MAC. You
must, also, enable the collection of individual RMON groups using the
commands described in the next step.
4. Use the following commands to enable the collection of information for
individual RMON groups by T-MAC:
•
Host group
SET MODULE {slot.subslot} RMON_HOST_STATS enable
•
MAC Layer Statistics group
SET MODULE {slot.subslot} RMON_MAC_LAYER_STATS enable
•
Promiscuous Statistics group
SET MODULE {slot.subslot} RMON_PROMISCUOUS_STATS enable
•
Ring Station Statistics group
SET MODULE {slot.subslot} RMON_RING_STATION_STATS enable
•
Source Routing Statistics group
SET MODULE {slot.subslot} RMON_SRC_ROUTING_STATS enable
For example, to enable our DMM to collect RMON Host group statistics for
token_ring_7, we used the following command:
8260> set module 8.2 rmon_host_stats enable
5. Verify that the T-MAC is enabled to collect the appropriate RMON group,
using the following example:
Chapter 10. 8260 RMON Support 231