Filter
Top Products
SHOW TR_SURROGATE {slot.subslot} REM_SOFT_ERROR
•
Threshold exceeded conditions
SHOW TR_SURROGATE {slot.subslot} REM_THRESHOLD_EXCD
10.8 DOT5_Group Support by T-MAC
DOT5_Group support by T-MAC allows you to perform the statistics collection
tasks defined in the IEEE 802.5 token-ring Management Information Base (MIB).
These functions allow the T-MAC to perform the following:
•
Collect soft error statistics
•
Provide interface status information
10.8.1 Using DOT5_Group Functions
To enable the T-MAC to collect token-ring statistics (dot5), you must use the
following command:
SET MODULE {slot-subslot} DOT5_GROUP enable
The information collected by the DOT5 Group can be displayed using the
following command:
SHOW COUNTER TOKEN_RING {token_ring_n}
10.9 Summary of T-MAC Monitoring Functions
The following table provides a summary of the monitoring functions supported by
T-MAC 2.0.
The following table indicates more details on what data each T-MAC function
uses.
Table 34. Functions Supported by T-MAC V2.0
Function RMON CRS REM DOT5
Collects information and forwards the
information upon request
X X X X
Analyzes information collected X
Assists in fault isolation X
Reports unsolicited error conditions X
Reports unsolicited ring topology changes X
Provides information to DMM for more
dynamic address-to-port mapping
X
Table 35 (Page 1 of 2). Functions Performed by T-MAC V2.0
Function RMON CRS REM DOT5
Provides Soft Error statistics X X X
Analyzes Soft Error statistics X
Provides Beaconing statistics X X
Analyzes Beacon frames X
Chapter 10. 8260 RMON Support 237