Filter
Top Products
Chapter 3 - Monitoring On Going Conferences
3-12
Connection
(cont.)
Partial
connection
The connection process is not yet
complete.
Faulty
Connection
The participant is connected, but
problems occurred in the
connection, such as
synchronization loss.
Noisy Line The line of this participant was
detected by the system as noisy.
Note: This indicator is used only
when the automatic noisy line
detection option was enabled in
the “system.cfg”.
Network
ISDN/T1-
CAS, H.323
or SIP
The type of supported network that the conference is using.
Participant
Numbers\
IP Address\
SIP Address
Displays the participant and MCU phone numbers or IP address/
alias, depending on the supported network and connection type.
In dial-in connection, displays the CLI number (ISDN) or IP
address/alias of the participant calling the MCU (marked by the
letter P) and the MCU number or IP address/alias dialed by the
participant (marked by the letter M). In dial-out connection
displays the dialed number (ISDN), IP address/alias (H.323) or
URI(SIP) of the participant.
Connection
Type
Identifies the defined type of participant's connection to the
conference.
Dial-out The MCU (conference) dials to the
participant.
Dial-in The participant calls the MCU
(conference).
Direct
connection
Leased Line connection (ISDN
only).
Table 3-2: On Going Conference - Monitor Pane Columns (Continued)
Column
Name
Icon Indication Description