Filter
Top Products
MGC Manager User’s Guide - VoicePlus Edition
2-43
6. Click the Settings tab.
The Conference Properties - Settings dialog box appears.
7. Define the Settings parameters, as described for the On Going
Conference, “Settings Parameters” on page 2-21.
8. Click the Participants tab to add defined participants (mainly dial-out)
either from a template or to define a new participant. If Meet Me Per
Conference is selected, access this tab if you want to define the number
of participants for which the system should save resources and the
maximum number of participants allowed to connect to this conference.
For details, see Table , “Defining Participant Properties,” on page 2-49.
9. If the Meet Me Per Conference option was selected in the General tab,
click the Meet Me Per Conf tab.
The Conference Properties - Meet Me Per Conf dialog box appears.
10. Define the Meet Me Per Conf parameters as described in MGC Manager
User Guide Vol I, Chapter 2.
11. Click OK to complete the Reservation definition.
The new Reservation is added to the Reservations list.
Starting Time To select a time at which the conference should be
started, set the starting time using either the 12H AM/
PM or the 24-hour format. (The time format is derived
from the Operating System time format defined in the
Regional Settings.) Highlight the hours or minutes in
the box and either use the spin buttons to modify the
displayed time, or type a time directly.
Reservation
Recurrence
Click this button to define a reservation for a
conference that will be repeated on a regular basis,
using the same basic parameters.
For more details, refer to “Defining Recurrent
Reservations” on page 2-44.
Table 2-7: Reservation Properties - Scheduler (Continued)
Field/Option Description
This tab appears only if the Meet Me Per Conference option is selected in the
General tab.