Filter
Top Products
Chapter 5 - Meeting Rooms and Entry Queues
5-10
b. Click OK.
The dial-in range is added to the ISDN Service table. Repeat the
above steps to define additional dial-in numbers.
Manually Assigning the H.323 Service Prefix to the Conference
To assign the H.323 Service Prefix to the conference:
The H.323 Network Service Prefix is part of the dialing string entered by
H.323 dial-in participants.
H.323 participants can dial-in to a conference defined as Meet Me per
Conference or Meeting Room by dialing the H.323 Network Service Prefix
and the Numeric ID of the conference.
11. To manually add an H.323 Network Service Prefix to the conference, in
the H.323 Prefix Service pane click the plus [+] icon.
The H323 Service dialog box opens.
a. Define the following parameters:
If required, repeat these steps to define additional prefixes.
Use the same procedures when manually adding and removing T1-CS dial-in
numbers.
Table 5-3: H.323 Network Service Parameters
Field/Option Parameter
H.323 Network
Service Name
Enter the name of the IP Network Service that
contains the prefix to be used by participants
connecting to the conference.
H.323 Service
Prefix
Enter the Network Service prefix as defined in the IP
Network Service Properties - H.323 dialog box.