Filter
Top Products
MGC Manager User’s Guide - VoicePlus Edition
5-17
Enabling Encryption for Entry Queues
To be able to join a conference from an Entry Queue as an encrypted
participant, the Entry Queue must be encrypted. All non-encrypted
participants connecting to this Entry Queue are disconnected from the MCU.
Encrypted participants can be moved from an encrypted Entry Queue to the
destination conference depending on the destination conference settings and
the setting of the participant level flag in the system.cfg file:
• If the target conference is encrypted, and the participant level flag is set
to YES, encrypted and non-encrypted participants can join the target
conference. In such a case, participants from an encrypted Entry Queue
and from non-encrypted Entry Queue can join the encrypted conference.
• If the target conference is encrypted, and the participant level flag is set
to NO, only encrypted participants can join the target conference. In such
a case, participants from an encrypted Entry Queue can be moved to the
target conference.
• If the target conference is not encrypted, and the participant level flag is
set to YES, encrypted and non-encrypted participants can join the target
conference. In such a case, participants from an encrypted Entry Queue
and from non-encrypted entry queue can join the non-encrypted
conference.
• If the target conference is not encrypted, and the participant level flag is
set to NO, only non- encrypted participants can join the target
conference.
Target
Conference
Settings
Audio Alg – If IP Only is selected, you can select the
audio algorithm to use for the VoIP participants
connecting to the Entry Queue. This must be the same
audio algorithm used in the target conference.
Entry Queue Dial-
in Numbers
Lists the numbers to be dialed by the PSTN/ISDN/T1-
CAS dial-in participants connecting to the Entry
Queue. This table is disabled when defining an IP Only
Entry Queue. If this table is left empty, the MCU
automatically assigns the dial-in number.
Table 5-4: Audio Only Entry Queue Properties (Continued)
Field/Option Description