Filter
Top Products
Chapter 2 - Defining Standard Audio Only Conferences and Reservations
2-18
Entry Queue
Access
Select this option when a single-dial Entry Queue is used for
participant access to all conferences. Participants are routed
from the Entry Queue to their “Home” conference using the
conference Numeric ID or password, depending on the MCU
configuration.
Meet Me Per
Conf
Select this option to enable undefined participants to connect
to a conference by dialing the conference dial-in number.
Undefined participants are those who were not defined prior
to the conference start.
When this option is selected, a dial-in number (ISDN
participant) or a string (H.323 participant) is assigned to the
conference by the system or manually by the operator.
If the Entry Queue Access option is selected for the
conference, and you do not want to assign an additional
ISDN dial-in number to the conference, do not select this
option.
Selecting this option activates the Meet Me per Conference
tab. To define the Meet Me per Conference properties, see
“Defining a New Audio Only Meeting Room” on page 5-4.
Note: If a conference is set as both Entry Queue Access and
Meet Me Per Conf to which a separate ISDN dial-in number
is assigned, participants can connect to the conference by
means of the Entry Queue and directly using this number. If
you do not require the direct dialing to the conference or you
want to conserve the number of dial-in numbers, select
either the Meet Me Per Conf option or the Entry Queue
Access option.
Table 2-1: Conference Properties - General (Continued)
Field/Option Description