Filter
Top Products
Chapter 8 - Recording
8-10
3. Click OK.
The link you defined is listed in the MCU Configuration under the
Recording Links icon. You can now assign the link to the conferences
that you want to record.
H.323
If you selected an H.323 link to the Readi
Recorder,
enter the required parameters:
• Alias and Recording Service Name - The H.323
Network Service Prefix defined in the
Readi
Recorder and the Recording Service Name.
• Alias Type - Select the type of alias from list:
— H323 ID
— E164
— URL ID
— Email ID
— Transport ID
— Party Number
It is recommended to use H323 ID or E164 as the
alias type.
Service Name Enter the name of the Network Service to be used by
the conferencing MCU when dialing to the
ReadiRecorder. If left blank, the default Network
Service (according to the selected network connection)
will be used.
Table 8-1: Recording Link Properties (Continued)
Field/Option Description
Default link
• You can modify the parameters of a link, but not its name. To modify a link,
right-click its icon or name and click Properties.
• If you defined several links, you can select one of them as the default.
Right-click the recording link’s icon and click Set As Default. The name of
default link is bolded.