Filter
Top Products
MGC Manager User’s Guide - VoicePlus Edition
4-71
— Disconnect the invitee and continue dialing out to invite other
individual by pressing *2 on your touch-tone telephone.
— Admit the invitee and return to the conference (thus ending the
Invite session) by pressing *3 on your touch-tone telephone.
— Disconnect the invitee and return to the conference (thus ending the
Invite session) by pressing *4 on your touch-tone telephone.
If the invitee did not answer the call, you can do one of the following:
— Disconnect the invitee and continue dialing out to invite other
individual by pressing *2 on your touch-tone telephone.
— Disconnect the invitee and return to the conference (thus ending the
Invite session) by pressing *4 on your touch-tone telephone.
Chairperson Initiated Blast Dial-out
Using the appropriate DTMF code, the chairperson or the participant
(depending on the configured permission) can indicate to the system when to
start the dial-out to multiple pre-defined participants.
This option prevents the system from automatically dialing out to pre-defined
participants in a Meeting Room. The chairperson can indicate to the system to
connect all predefined dial-out participants or to dial to individual dial-out
participants by indicating their sequential order number in the list of
participants defined for the conference.
In such a case, the chairperson enters the appropriate DTMF code followed
by the participant number on the list. For example, if the DTMF code is *25*
for blast dial-out, to instruct the system to dial to the third participant on the
list, the chairperson enters *253. To instruct the system to dial-out to all
predefined participants in one operation, the chairperson enters the DTMF
code, for example (*25*).
The DTMF code assigned to blast dial-out operation may be configured in the
IVR Message Service - DTMF Codes dialog box. For more details, see
Chapter 2.