Filter
Top Products
MGC Manager User’s Guide - VoicePlus Edition
4-73
YES (default) is set to NO.
• Roll Call is not supported with the Guidance feature or when the
participant is moved from the Operator conference (attended status) to
the Home Conference.
• Roll Call is not supported when the participant is moved from one
conference to another. The participant name is not announced when the
participant leaves the first conference and enters the second conference.
• Roll Call is not supported with the Invite feature. When a participant is
invited to the conference by the chairperson, the invitee name is not
recorded and therefore not announced when the participant enters or
leaves the conference or during the Roll Call.
Table 4-6 lists the Roll Call actions and the corresponding DTMF codes.
Table 4-6: Roll Call DTMF Options
Operation
Default
DTMF
Code
Description
Enable Roll Call *32 Enables the Roll Call feature for the
conference.
Disable Roll Call #32 Disabled, the Roll Call feature for the
conference. However, participants names are
still recorded in case the Roll Call feature will
be enabled later, during the conference.
Roll Call Review
Names
*33 Requests to play the recorded names of the
participants connected to the conference, one
after the other, in the order in which they
entered the conference.
Roll Call Stop
Review Names
#33 When requested, the system stops the Roll Call
playback.