Filter
Top Products
Chapter 8 - Recording
8-20
3. In the Connection Type field, select Dial-out.
4. In the Participant Phone Numbers field enter Prairie’s phone number.
5. In the Interface Type field, make sure that ISDN is selected.
6. Select the Audio Only check box.
7. Click the Advanced tab.
The Participant Properties - Advanced dialog box opens.
8. In the Recording field, select Dial-up.
9. Click OK to complete the participant definition.
The participant (Recording Port) is added to the list of participants for
the conference, with an icon indicating that it is a recording port.
Recording and Playback
To record a conference:
• When the conference starts, activate the recording function by pressing
the DTMF code representing blast dial-out and the participant (recording
port) ID at any time during the conference. For example, *259 where *25