Filter
Top Products
Scan Settings
3-5
Basic Scanning Features
3
Scan Settings
To match the original you are sending, set the document size, resolution, exposure,
and original type.
NOTE
Changed scan settings are not saved. For instructions on saving settings, see "User
Preset Keys," on p. 4-34.
Two-Sided Originals
You can set the machine to automatically turn over two-sided originals placed in the
feeder, so as to scan each side separately.
IMPORTANT
•
The Two-sided Original mode is available only if the optional Feeder (DADF-K1) is
attached.
•
The Two-sided Original mode cannot be used together with the Document Size Select
(Other Size) or Two-page Separation mode.
•
When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally in the feeder. If these originals are placed
vertically, the back sides of the originals are scanned upside down.
1
Place your originals in the feeder ➞ specify the destination ➞
press [Two-sided Original].
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."