Different Size Originals
4-17
Special Scanning Features
4
Different Size Originals
This mode enables you to scan different size originals together. However, the length
(vertical direction) of the different paper sizes must be the same. For example, LTR
and 11" x 17", or STMT and LTRR paper sizes can be scanned together.
IMPORTANT
•
The Different Size Originals mode cannot be used together with the Two-page
Separation, Original Frame Erase, or Book Frame Erase modes.
•
If Document Size Select is set to anything but 'Auto', all the originals are scanned in the
specified size. If you want to scan the originals in their original sizes, make sure to set
Document Size Select to [Auto].
•
If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
•
You cannot mix originals of different lengths together, such as LTR and LGL, or 11" x 17"
and STMT.
•
If the Different Size Originals mode is set, the scanning speed is slower than normal.
1
Place your originals ➞ specify the destination.
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."
2
Press the Scan Settings drop-down list ➞ press [Option].