Filter
Top Products
Paper Drawer Selection
8-40
Customizing Communications Settings
8
• Switch C: The image is reduced and printed on paper that differs in width from
the received document.
• Switch D: The image is printed on paper that is larger in size than the received
document.
NOTE
•
For more information on selecting a paper source for printing received documents, see
Chapter 4, "Customizing Settings," in the Reference Guide
.
•
The default setting for all switches is 'On'.
1
Press (Additional Functions) ➞ [Communications
Settings] ➞ [RX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Two-Sided Printing," on
p. 8-37.
Received Data (Original) Output
11" x 17"
LTRR
Received Data (Original) Output
11" x 17"
LTRR