Filter
Top Products
Frame Erase
4-13
Special Scanning Features
4
7
Press [Done] ➞ [OK].
The display returns to the Send Basic Features screen.
8
Press (Start).
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
If the original contains fine text or print, such as a map, the machine may need to
read or scan the document several times. Do not remove the original from the
platen glass until scanning is complete.
NOTE
•
To cancel this setting, press the Scan Settings drop-down list ➞ press [Option] ➞
[Special Features] ➞ [Frame Erase] ➞ [Cancel].
•
To cancel the scan settings, press the Scan Settings drop-down list ➞ press
[Option] ➞ [Cancel].
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Binding Erase
IMPORTANT
•
The Binding Erase mode cannot be used together with the Document Size Select
(11x17+ and Other Size), or Two-page Separation modes.
•
Do not place originals with binding holes in the feeder, as this may damage the originals.
1
Place your originals on the platen glass ➞ specify the
destination.
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."